Page 22 - 江苏全友电气有限公司

CCX-L密集型铜铝复合母线槽 CCX-L密集型铜铝复合母线槽

CCX-L密集型铜铝复合母线槽 CCX-L密集型铜铝复合母线槽
CCX-L Copper-Al Complex Busbar Channel CCX-L Copper-Al Complex Busbar Channel

caused by the reduction of long distance transmission voltage drop, significantly enhanced busbar current carrying
额定电流 Rated current A 1250 1600 2000 2500 3150
capacity.
阻抗Z（35℃）Impedance mΩ/m 0.058 0.038 0.029 0.024 0.020 Aluminum plate structure, the whole 3 in close contact with the conductor, can from the side plate, cover plate and
电阻R（35℃） Resistance mΩ/m 0.056 0.037 0.028 0.023 0.019 other aspects of direct transmission, heat, heat capacity improvement of busbar system, improve the load flow.
4, in the area of the housing constitute integral earthing system, the user can select the whole aluminum shell with
电抗X（35℃） Reactance mΩ/m 0.014 0.0.10 0.008 0.006 0.005 > 50% phase capacity as the grounding conductor, in the event of large grounding fault, the short circuit current can
电压降（COSΦ=0.9）Voltage pass aluminium metal shell with large cross section for the effective transmission, protecting the busbar trunking system
Drop V/m 0.084 0.086 0.093 0.083 0.082 safe operation and the safety of the operator.

普通直母线单元：
结构配置 Structural configuration
CCX-L型系列母线槽采用合理的“三明治”相线紧密叠压结构设计，使母线槽外形更加紧凑、体积更 The ordinary straight bus unit:
小，并增强了母线系统的动热稳定性，使母线具有阻抗低、电压降低优点，杜绝了发生火灾时母线槽“烟囱 CCX-L型密集绝缘母线为全封闭型，防护等级IP40/IP54，全铝合
效应”的形成。 金配置的外壳可作为短路接地最短途径，最大限度的保护用户安全操
CCX-L series of busbar adopts reasonable " sandwich " phase closely laminated structure design, make the 作、使用。
bus groove shape is more compact, smaller volume, and enhanced thermal stability bus system, the bus has low 一般配置为垂直立式安装，也可以根据要求水平卧式安装；每节
resistance, voltage reduction advantages, formed to fire when the parent slot " chimney effect". 单元配置一套接头组件；铜铝复合导体：200A-2000A为单槽配置，
2500-3150A为双槽配置。
母线外壳配置 Bus shell configuration
CCX-L dense insulated bus is fully enclosed type, protection grade IP40/
外壳采用加强型拉制钢板型材组成或采用电工用铝合金整体式 IP54, aluminum alloy shell configuration can be as short circuit grounding the
侧板型材与拉制铝盖板型材混合组成。既拥有超高的抗弯强度又具 shortest path, user security operation, maximum protection use.
有良好的抗锈蚀性和极好的散热性、接地性。 The general configuration for vertical installation, can also according to
一、钢制外壳盖、侧板用优质钢板制成，比较经济实惠 the requirements of installation horizontal; each unit is configured with a set
of joint assembly; copper and aluminum composite conductors: 200A-2000A as the single slot configuration, 2500-
二、铝合金外壳
3150A is a double tank configuration.
1、整体式铝合金侧板结构，将导体整体包裹在金属侧板内，
完全阻止了水汽的渗透和有害微尘的侵入，使母线整体的防护等级 直线馈电母线单元（带插孔）：
达到真正的IP40防护； Linear feeder bus unit ( with Jack):
2、特殊的铝质外壳，形成无磁性扼流圈，可消减大电流母线 CCX-L型密集绝缘母线为全封闭型，防护等级IP40/IP54，全
相间涡流的传递，减少主母排谐波电流的通过，降低上述原因引起 铝合金配置的外壳可作为短路接地最短途径，最大限度的保护用户
的发热现象、降低长距离输电的电压降，显著增强母排载流能力。 安全操作、使用并可灵活设计插孔位置，且双面均可设计，绝缘插
3、整体紧密接触导体的铝质侧板结构，可以从侧板、盖板等多方面直接传输、散发热量，改善母线系统 孔为先进的防意外触摸设计；插孔间距≥0.5米，每节母线可按客户
的散热能力，提高载流量。 要求间距连续配置插孔；
4、在外壳范围内构成了整体式接地系统，用户可以选用此具有＞50%相线容量的整体铝质外壳作为接地 一般配置为垂直立式安装，也可以根据要求水平卧式安装；
导体，在发生大容量接地短路故障时，短路电流可先经过大截面的铝质金属外壳作有效传输，保护整条母线 每节单元配置一套接头组件；
槽系统的安全运行和操作者的安全。 铜铝复合导体：200A-2000A为单槽配置，2500-3150A为双
Enclosure is made of reinforced drawing steel profiles or use of electrical components made of aluminum alloy 槽配置。
integral side section and drawn aluminum alloy profiles mixed. Heat radiation, ground of have both flexural strength of CCX-L dense insulated bus is fully enclosed type, protection
high corrosion resistance and excellent and good. grade IP40/IP54, aluminum alloy shell configuration can be as short circuit grounding the shortest path, user security
A, steel shell cover, the board is made of high-quality steel plate, the more economic benefits operation, maximum protection and flexible design and position of the jack, double insulation can be designed, Jack is
Two, aluminum alloy shell designed to prevent accidental touch first into the jack spacing≥; 0.5 meters, each bus can be according to customer
1, integral aluminum alloy plate structure, the conductor the whole package in the metal side plates, completely requirements continuously configuration jack;
prevented the intrusion of moisture and air and dust, so that the whole bus protection grade reaches IP40 protection The general configuration for vertical installation, can also according to the requirements of installation horizontal;
real; Each unit is configured with a set of joint assembly;
2, special aluminum shell, the formation of non-magnetic choke, transmission can be cut and heavy current Copper and aluminum composite conductors: 200A-2000A as the single slot configuration, 2500-3150A is a
busbar and eddy current, reduce the main bus harmonic current by reducing the above reasons, fever phenomenon,
double tank configuration.

19 BUSWAY SERIES BUSWAY SERIES 20