Page 25 - 安徽翼腾智能电力装备有限公司

安装示意图 Installation Diagram ETK400/450-12

地基及外形尺寸 (mm)
Foundation and Dimention ETK450-12

本产品安装在混凝土台基预埋槽钢上，台基应该足以承受设备的
总重量。
ETK450-12 is installed on concrete pedestal embedded
U-steel, the pedestal should afford total total weight of
the equipment.

注：
● 二次浇灌的基础槽钢反扣，不平度每米不大于 1mm；
● 开关柜固定在基础槽钢上允许焊接固定；
● 开关柜基础载荷为 500-700kg/ 台。 ۳ᆩയᨂἷ Ἰ
1FEFTUBM 6 TUFFM
Attention:
ႃ፶ᄦ౜
● Secondary grouting pedestal U-steel is turned over and fixed, the waviness $BCMF $PWFS ۳ᆩയᨂἷ Ἰ
is not more than 1mm; 1FEFTUBM 6 TUFFM
● The switchgear is fixed on pedestal U-steel and allowed welding: ႃ፶ᄦ౜ ߷ᜉೝξᤰ᥋
$BCMF $PWFS
● Swithgear pedestal loading is 500kg-700kg/pc. *OTUBMMBUJPO BOE
ʷ൓ႃ፶෤
1SJNBSZ .BJOUFOBODF
$IBOOFM
DBCMF USFODI ߷ᜉೝξᤰ᥋
*OTUBMMBUJPO BOE
ʷ൓ႃ፶෤
1SJNBSZ .BJOUFOBODF
DBCMF USFODI $IBOOFM
ኄʷ൓฻༟ຉіژ
1SJNBSZ (SPVUJOH $PODSFUF

ኄʷ൓฻༟ຉіژ
ڡ۳ڏ
1SJNBSZ (SPVUJOH $PODSFUF 'PVOEBUJPO %SBXJOH

ڡ۳ڏ
开关柜外形及安装尺寸（mm） 'PVOEBUJPO %SBXJOH
Shape and installation dimension of switchgear (mm) ಅࠕ
8JEUI PG TXJUDIHFBS
ಅࠕѓ
ಅࠕ
● 开关柜标准高度 2200mm； $BCJOFU SFEVDUJPO
8JEUI PG TXJUDIHFBS
● 开关柜标准深度 1100mm, 如上进上出线深度为 1340mm; ಅࠕѓ
$BCJOFU SFEVDUJPO
● 开关柜标准宽度 450/475mm
● The standard height of the switch cabinet is 2200mm;
● The standard depth of the switch cabinet is 1100mm, and the depth of the

upper and lower wires is 1340mm.
● Standard width of switch cabinet 450/475mm

नТಅअ౜ࣱ᭧ڏ
'MPPS QMBO GPS JOTUBMMBUJPO PG TXJUDIHFBS
नТಅअ౜ࣱ᭧ڏ
'MPPS QMBO GPS JOTUBMMBUJPO PG TXJUDIHFBS
19 20